LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Stinger GT-Line, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 3.3L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the engine cover.

    (Refer to Engine Mechanical System - "ENGINE COVER ")

  3. Disconnect the intake hose (A).
    G14999844Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the ETC module connector (A).
  5. Disconnect the coolant hose (B).
  6. Remove the ETC module from the engine after loosening the installation bolt (C).

Electronic throttle body mounting bolt: 

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

G14999845Courtesy of KIA MOTORS AMERICA, INC.