Repair Procedures: Removal
- Disconnect the battery negative (-) terminal.
- Open the fuel filler door and remove the fuel filler cap.
- Lift the vehicle up.
- Remove the rear wheel guard [LH].
(Refer to Body (Interior and Exterior) - "REAR WHEEL GUARD ")
- Separate the hose (A, B).
Tightening torque:
4.9 - 5.9 N.m (0.5 - 0.6 kgf.m, 3.6 - 4.3 lb.ft, 43.4 - 52.1 lb.in)
- Fuel filler hose
- Leveling hose
- Separate the ventilation quick-connector (A).
- Remove the fuel filler-neck assembly after removing the nuts.
Tightening torque:
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)