Charging System - 2.5L: Troubleshooting
NOTE:
- Be careful not to short-circuit the wiring by the body
- In case of discharging problem, measure the parasitic current.
- Be careful not to short-circuit the wiring by other wirings.
- When checking the alternator main fuse, perform continuity test and voltage test between terminals as well as visual check to confirm normal operation.
- Check first the ground cable terminal connection state before replace the component.
- Use genuine parts.
- Be careful as misassembly may cause short-circuit of wiring, which may result in battery discharge.
- As it will reset and appear as normal if the battery negative (-) terminal is disconnected while measuring parasitic current, measure by using a hook meter without disconnecting the negative (-) terminal.
- This list does not include all possible symptoms.
- For more effective repairs, refer to DTC guide and ETM.
| Symptom | Suspected Area | Remedy |
|---|---|---|
| Charging warning indicator does not light with ignition switch "ON" and engine off | Alternator main fuse blown | Replace main fuse. |
| Broken indicator internal bulb | Inspect/Repair/Replace bulb or instrument cluster. | |
| Defective electronic voltage regulator or alternator | Inspect/Repair/Replace voltage regulator or alternator. | |
| Indicator fuse blown | Replace Indicator fuse. | |
| Wiring connection loose | Inspect/Repair/Replace wiring connection. | |
| Charging warning indicator does not turn off during engine running. | Alternator main fuse blown | Inspect/Replace alternator main fuse or battery cable. |
| Defective connection, corroded or worn battery cable | Inspect connection of battery cable and Inspect/Repair/Replace cable. | |
| Defective instrument cluster | Inspect/Replace instrument cluster. | |
| Defective voltage regulator or alternator | Inspect/Replace voltage regulator or alternator. | |
| Defective wiring | Inspect/Replace wiring. | |
| Slip in alternator pulley | Inspect/Replace alternator pulley. | |
| Worn drive belt or lack of tension | Inspect/Repair/Replace drive belt. | |
| Charging warning indicator on | Alternator main fuse blown | Replace alternator main fuse. |
| Broken alternator main fuse | Inspect/Repair/Replace alternator main fuse. | |
| Communication abnormality | Inspect the wave form of alternator terminals. | |
| Inspect the wiring between the regulator and ECM. | ||
| Defective alternator | Inspect/Repair/Replace alternator. | |
| Defective alternator register | Repair/Replace alternator register. | |
| Defective ground | Inspect/Repair/Replace ground. | |
| Defective voltage regulator | Inspect/Repair/Replace voltage regulator. | |
| Defective voltage regulator or alternator | Inspect/Replace voltage regulator or alternator. | |
| Deterioration due to battery positive (+) terminal connection fault | Check the specified torque of the battery (+) terminal. | |
| Drive belt loose or worn | Adjust tension, Inspect/Repair/Replace drive belt. | |
| Drive belt rotation stops due to slip in crankshaft damper pulley or defective pulley | Inspect/replace crankshaft damper pulley. | |
| Inspect/repair/replace drive belt tensioner bearing. | ||
| Error in Alternator Management System (AMS) voltage | Inspect battery sensor connecting harness and connection with body. | |
| Error in battery sensor | Inspect battery sensor connecting harness and connection with body. | |
| Fault/Short out between the body and transmission ground cable | Inspect/Repair the ground cable. | |
| Short between battery sensor wiring and body | Inspect/Repair/Replace battery sensor. | |
| Short out alternator extension connector internal | Repair or Replace the wiring/pin. | |
| Discharge | Slip, worn or lack of tension in drive belt | Adjust tension, Inspect/Repair/Replace drive belt. |
| Inspect/Replace auto tensioner (only for auto tensioner type). | ||
| Wiring connection or shorts out the circuit | Inspect wiring connection and repair/replace the wiring. | |
| Defective ground | Inspect/Repair the ground cable. | |
| Battery damaged | Replace battery. | |
| Parasitic current more than specification | Inspect/Replace the parts. | |
| Tuning with non-genuine parts | Repair with genuine parts. | |
| Low state of charge (the lowest voltage) | Learn battery sensor or Replace battery sensor. | |
| Battery wiring | Repair/Replace wiring after checking. | |
| Parasitic current due to failure of main relay control in ECM | Inspect/Replace ECM. | |
| Faulty harness due to moisture | Repair/Replace wiring. | |
| Faulty parts related electrical system | Replace electrical system. | |
| Parasitic current more than specification due to faulty ECM | Inspect/Replace ECM. | |
| Alternator connector connection | Check connector connection. | |
| Battery swelling | Defective Battery | Replace battery. |
| Defective Regulator or alternator | Replace regulator or alternator. | |
| Faulty charge at startup (normal charging at acceleration) | Faulty wiring connection, circuit and connector pins connection | Inspect/Repair/Replace wiring. |
| Alternator main fuse blown frequently | Be blown or Short out the battery wiring | Check wiring connection and Repair or Replace the wiring. |
| Engine warning indicator on | Battery sensor mounting bolt loosen | Tighten with specified torque. |
| Defective headlights | Defective wiring | Inspect the wiring connection and repair/replace the wiring. |