Repair Procedures: Removal
- Disconnect the battery negative (-) terminal (A) after loosening the nut and disconnecting the battery sensor connector (B)
Tightening torque:
7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb.ft)
- Separate the battery sensor wiring (A) after removing the clip.
- Remove the battery sensor (A) after removing the flange bolt.
Tightening torque:
26.5 - 32.4 N.m (2.7 - 3.3 kgf.m, 19.5 - 23.9lb.ft)