Repair Procedures: Removal
- Disconnect the battery negative (-) terminal.
- Remove the drive belt.
(Refer to Engine Mechanical System - "DRIVE BELT ")
- Separate the engine wiring (A) after removing the clip.
- Separate the intercooler reservoir tank (A) after removing the mounting bolts.
Tightening Torque:
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)
- After separating the engine wiring protector (B), remove the intercooler reservoir tank stay (A) by removing the mounting bolts.
Tightening torque:
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)
- Disconnect the alternator connector (A).
- Disconnect the alternator "B" terminal (A) after removing the nut.
Tightening Torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)
- Remove the alternator (A) after removing the mounting bolts.
Tightening torque:
49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb.ft)