Repair Procedures: Disassembly
- Remove the Overrunning Alternator Pulleys (OAP) cap (A).
- Remove the alternator pulley (A) after removing the nut.
Tightening torque:
75.5 - 81.4 N.m (7.7 - 8.3 kgf.m, 55.7 - 60 lb.ft)
- Remove the spacer (A).
- Remove the alternator cover (A) after removing the nuts.
Tightening torque:
3.0 - 3.5 N.m (0.31 - 0.36 kgf.m, 2.2 - 2.6 lb.ft, 26.9 - 31.2 lb.in)
- Remove the brush & regulator assembly (A) after removing the bolts.
Tightening Torque:
4.0 - 4.4 N.m (0.41 - 0.45 kgf.m, 3.0 - 3.3 lb.ft, 35.6 - 39.1 lb.in)
- Dissolve the stator lead (A).
- Remove the front bracket (A) after removing the bolts.
Tightening Torque:
4.5 - 5.5 N.m (0.46 - 0.56 kgf.m, 3.3 - 4.1 lb.ft, 39.9 - 48.6 lb.in)
- Remove the rotor assembly (A).
- Remove the stator (A) from rear bracket assembly.