LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Niro EV EX Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Electric Power Control Unit (EPCU)) >> Repair Procedures >> Removal >> Notes

Repair Procedures: Removal: Notes

WARNING: This page is about a different car, the 2019 Kia Niro EV. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Be sure to read and follow the "GENERAL SAFETY INFORMATION & CAUTION " before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
  • Be sure to shut off the high voltage before doing any work related with the high voltage system (Refer to "HIGH VOLTAGE SHUT-OFF PROCEDURE "). Failure to follow the safety instructions may result in serious electrical injuries.

Information 

  1. Shut off the high voltage.

    (Refer to Vehicle Control System - "HIGH VOLTAGE SHUT-OFF PROCEDURES ")

  2. Remove the drain plug and discharge the coolant.

    (Refer to COOLANT )

  3. Disconnect the PTC heater pump connector (A).
  4. Disconnect the high voltage junction box connector (B).
  5. Disconnect the on-board charger input connector (C).
  6. Disconnect the quick charge cable connector (D).
    G13206469Courtesy of KIA MOTORS AMERICA, INC.
  7. Disconnect the high voltage junction box connector (A).
    G13206470Courtesy of KIA MOTORS AMERICA, INC.
  8. Disconnect the A/C compressor high voltage cable (A).
    G13206471Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the on-board charger side cover (A) and electric power control unit side cover (B).

    Tightening Torque:  3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft)

    G13206472Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove the on-board charger mounting bolt (A) and electric power control unit mounting bolt (B).

    Tightening Torque  :

    1. 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 4.3 - 6.8 lb.ft)
    2. 8.8 - 9.8 N.m (0.9 - 1.0 kgf.m, 6.5 - 7.2 lb.ft)
    CAUTION:
    • Make sure not to let the bolts fall inside.
    G13206473Courtesy of KIA MOTORS AMERICA, INC.
  11. Remove the high voltage joint box after removing the bolt (A).

    Tightening Torque:  15.7 - 23.5 N.m (1.6 - 2.4 kgf.m, 11.6 - 17.4 lb.ft)

    G13206474Courtesy of KIA MOTORS AMERICA, INC.
    G13206475Courtesy of KIA MOTORS AMERICA, INC.
    G13206476Courtesy of KIA MOTORS AMERICA, INC.
  12. Disconnect the on-board charger cooling hose (A).
    G13206477Courtesy of KIA MOTORS AMERICA, INC.
  13. Disconnect the electric power control unit signal connector (A).
    G13206478Courtesy of KIA MOTORS AMERICA, INC.
  14. Loosen the mounting bolt (A) and then remove the cooling pipe mounting bracket from the on-board charger.

    Tightening Torque:  8.8 - 10.7 N.m (0.9 - 1.1 kgf.m, 6.5 - 7.9 lb.ft)

    G13206479Courtesy of KIA MOTORS AMERICA, INC.
  15. Remove the on-board charger after loosening the mounting bolt (A)

    Tightening Torque:  19.6 - 23.5 N.m (2.0 - 2.4 kgf.m, 14.4 - 17.3 lb.ft)

    G13206480Courtesy of KIA MOTORS AMERICA, INC.
    G13206481Courtesy of KIA MOTORS AMERICA, INC.
  16. Disconnect the electric power control unit cooling hose (A).
  17. Remove the electric power control unit "+" cable (B) after loosening the mounting bolt (D).

    Tightening Torque:  8.8 - 10.7 N.m (0.7 - 1.0 kgf.m, 6.5 - 7.9 lb.ft)

  18. Disconnect the Low Voltage DC/DC Converter "-" cable (C).
    G13206482Courtesy of KIA MOTORS AMERICA, INC.
  19. Disconnect the electric power control unit connector (A).
  20. Remove the electric water pump after loosening the mounting bolt (B).

    Tightening Torque:  19.6 - 23.5 N.m (2.0 - 2.4 kgf.m, 14.4 - 17.3 lb.ft)

    G13206483Courtesy of KIA MOTORS AMERICA, INC.
  21. Remove the three phase cover assembly (A) after loosening the mounting bolts (4EA).

    Tightening Torque:  3.9 - 5.8 N.m (0.4 - 0.6 kgf.m, 2.8 - 4.3 lb.ft)

    G13206484Courtesy of KIA MOTORS AMERICA, INC.
  22. Remove the electric power control unit (C) after loosening the mounting bolt (A, B).

    Tightening Torque  :

    1. 8.8 - 10.7 N.m (0.9 - 1.1 kgf.m, 6.5 - 7.9 lb.ft)
    2. 49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.1 - 47.0 lb.ft)
    G13206485Courtesy of KIA MOTORS AMERICA, INC.
    G13206486Courtesy of KIA MOTORS AMERICA, INC.