Repair Procedures: Replacement
CAUTION:
- When installing the belt, make sure not to damage the retractor.
- Put on gloves to prevent hand injuries.
- Remove the rear seat assembly.
(Refer to " Replacement ")
- Remove the rear package tray trim.
(Refer to " Replacement ")
- Loosen the mounting bolts and remove the rear seat belt lower anchor (A).
Tightening torque:
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)
- Loosen the mounting bolt and remove the rear seat belt retractor (A).
Tightening torque:
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)
[LH]
[RH]
- Install in the reverse order of removal.