Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to " RELEASE RESIDUAL PRESSURE ")
Remove the intake manifold.
(Refer to " Removal And Installation ")
Remove the injector foam (A).

Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rail pressure sensor connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the rail pressure sensor (A).
Tightening torque:

29.5 - 32.3 N.m (3.0 - 3.5 kgf.m, 21.7 - 25.3 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.