Repair Procedures: Removal: [2WD]
- Remove the fuel pump module.
(Refer to " [2WD] ")
- Disconnect the fuel pump connector (A) and fuel sender connector (B).
- After releasing the fixing clip (A), remove the fuel feed tube quick-connector (B).
- Remove the stopper (A).
- Remove the plate assembly (A) and O-ring (B).
- Remove the reservoir cup (A) after releasing the fixing hooks.
- Remove the pump filter (A) after releasing the fixing hooks.
- Remove the wiring from the fuel filter after disconnecting the fuel pump connector (A) and ground (B).
- Remove the O-ring (B) and spacer (C) after removing the fuel pump and tube (A).