Repair Procedures: Removal: [4WD]
- Remove the fuel pump module.
(Refer to " [4WD] ")
- Disconnect the fuel sender connector (A).
- Disconnect the fuel pump connector (A).
- Disconnect the fuel feed tube quick-connector (A) after removing the fixing clip.
- Remove the stopper (A).
- Remove the plate assembly (A) and O-ring.
- Separate the suction hose nipple (A) by pulling it in the direction of arrow after releasing the hook.
- Remove the reservoir cup and fuel sender (A) after releasing the fixing hooks.
- Remove the fuel pressure regulator fixing clip (A).
- Remove the fuel pressure regulator (A).