Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Install the drive belt (A).
- Adjust tension by tightening the alternator tension adjust bolt (B) and then install the mounting bolts (A).
Tightening torque
12 mm (0.47 in) bolt:
26.5 - 37.3 N.m (2.7 - 3.8 kgf.m, 19.5 - 27.5 lb.ft) [10T Type]
24.3 - 26.9 N.m (2.48 - 2.74 kgf.m, 17.9 - 19.8 lb.ft) [8T Type]
14 mm (0.55 in) bolt:
29.4-41.2 N.m (3.0-4.2 kgf.m, 21.7-30.4 lb.ft)