LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine And Transmission Assembly 3.3L >> Engine Mounting >> Repair Procedures >> Removal And Installation >> LH Engine Mounting Bracket

LH Engine Mounting Bracket

  1. Remove the sub frame.

    (Refer to " SUB FRAME  ") 

  2. Remove the LH engine mounting bracket (A).

    Tightening torque: 

    49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb.ft)

    G12802944Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the LH engine mounting support bracket (A).

    Tightening torque: 

    49.0 - 58.8 N.m (5.0 - 6.0 kgf.m, 36.2 - 43.4 lb.ft)

    G12802945Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.