LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel Delivery System - 2.0L) >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the rear transverse trim.

    (Refer to Body (Interior and Exterior) - " REAR PILLAR TRIM  ") 

  3. Remove the luggage side trim.

    (Refer to Body (Interior and Exterior) - " LUGGAGE SIDE TRIM  ") 

  4. Disconnect the fuel pump control module connector (A).
  5. Remove the mounting nuts (B), and then remove the fuel pump control module (C) from the vehicle.
G12795199Courtesy of KIA MOTORS AMERICA, INC.