LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 2.0L) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - " RELEASE RESIDUAL PRESSURE IN FUEL LINE  ") 

  2. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  3. Remove the intake manifold.

    (Refer to Engine Mechanical System - " INTAKE MANIFOLD  ") 

  4. Remove the delivery pipe foam (A).
    G12792311Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
    G12792312Courtesy of KIA MOTORS AMERICA, INC.