LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 2.0L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • DON'T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the camshaft position sensor after loosening the mounting bolt (B).

    Camshaft position sensor installation bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

[Bank 1/Intake] 

G12792292Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Exhaust] 

G12792293Courtesy of KIA MOTORS AMERICA, INC.