LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 2.0L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the front engine room under cover.

    (Refer to Engine Mechanical System - " ENGINE ROOM UNDER COVER  ") 

  3. Disconnect the connector (A) and then remove the ambient temperature sensor (B).
G12792332Courtesy of KIA MOTORS AMERICA, INC.