LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.3L >> Fuel Pressure Sensor (FPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - " RELEASE RESIDUAL PRESSURE IN FUEL LINE  ") 

  2. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  3. Remove the rear seat cushion.

    (Refer to Body - " REAR SEAT ASSEMBLY  ") 

  4. Remove the fuel pump service cover (A) after loosening the mounting screws.
    G12803701Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the fuel feed quick-connector (A).
  6. Remove the fuel pressure sensor fixing pin (B).
  7. Remove the fuel pressure sensor from the fuel pump.
    G12803702Courtesy of KIA MOTORS AMERICA, INC.