Repair Procedures: Removal
- Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - " RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Remove the intake manifold.
(Refer to Engine Mechanical System - INTAKE MANIFOLD ")
- Remove the high pressure fuel pipe.
(Refer to Fuel Delivery System - "Fuel Line)
- Remove the cross over fuel pipe (A).
- Remove the mounting bolts (A), and then remove the delivery pipe & injector assembly from the engine.
- Disconnect the injector & rail pressure sensor connector (A).