LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go ISG System - 3.3L >> Starter >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the RH engine mounting support bracket.

    (Refer to " ENGINE MOUNTING  ") 

  3. Remove the stater solenoid "B" terminal mounting nut (B), and then disconnect the stater cable and ST connector (A).
    G12803641Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the starter mounting bolts.
    G12803642Courtesy of KIA MOTORS AMERICA, INC.
    G12803643Courtesy of KIA MOTORS AMERICA, INC.