LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake And Exhaust System 3.3L >> Intake Manifold >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install the new water gasket (A).

    [LH] 

    G12803023Courtesy of KIA MOTORS AMERICA, INC.

    [RH] 

    G12803024Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Always use a new water gasket.
  2. Connect the water hose (A).
    G12803025Courtesy of KIA MOTORS AMERICA, INC.
  3. Install the new intake manifold gasket (A).
    G12803026Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Always use a new intake manifold gasket.
  4. Install the intake manifold (A).
    G12803027Courtesy of KIA MOTORS AMERICA, INC.
  5. Tighten the intake manifold bolts, in several passes as below.

    Tightening torque 

    1st step (a - h):

    3.9 - 5.8 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft, 34.7 - 52.1 lb.in)

    2nd step (1 - 8):

    26.5 - 31.4 N.m (2.7 - 3.2 kgf.m, 19.5 - 23.1 lb.ft)

    Fig 1: Intake Manifold Bolts Tightening Sequence
    G12803028Courtesy of KIA MOTORS AMERICA, INC.
  6. Install the other parts in the reverse order of removal.
  7. Fill the coolant.

    (Refer to " COOLANT  ") 

  8. Start engine and check for leaks.
  9. Recheck engine coolant level.