LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Intake And Exhaust System 3.3L >> Intake Manifold >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative battery terminal.
  2. Remove the engine cover.

    (Refer to " ENGINE COVER  ") 

  3. Remove the engine room front under cover.

    (Refer to " ENGINE ROOM UNDER COVER  ") 

  4. Drain the coolant.

    (Refer to " COOLANT  ") 

  5. Disconnect the coolant vent hose (A).
    G12803017Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the surge tank.

    (Refer to " SURGE TANK  ") 

  7. Remove the foam (A).
    G12803018Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the intake manifold (A).
    G12803019Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Be sure to drain the engine coolant before removing the intake manifold.
    • If any coolant drained from the cylinder head vent hole has entered the intake port. This can potentially lead to engine trouble.
  9. Disconnect the water hose (A).
    G12803020Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove the water gasket (A).

    [LH] 

    G12803021Courtesy of KIA MOTORS AMERICA, INC.

    [RH] 

    G12803022Courtesy of KIA MOTORS AMERICA, INC.