LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System - 2.4L) >> Knock Sensor (KS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the knock sensor connector (A).
    G12848561Courtesy of KIA MOTORS AMERICA, INC.
  3. Measure resistance between the injector terminals 1 and 2.
    G12848562Courtesy of KIA MOTORS AMERICA, INC.
  4. Check that the resistance is within the specification.

    Specification  : About 4.87 MΩ [20°C (68°F)]