LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Control System - 2.4L) >> Shift Lever >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Move the shift lever to "N" range.
  2. Disconnect the battery negative (-) cable.
  3. Remove the knob & boots (A) by pulling the direction of arrow after removing the boots from the console upper cover.
    G12850120Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the floor console assembly. (Refer to Body - "CONSOLE ")
  5. Disconnect the main connector (A).
    G12850121Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the shift cable (A) after removing a snap pin.
    G12850122Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the shift lever assembly (A).

    Tightening torque: 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

    G12850123Courtesy of KIA MOTORS AMERICA, INC.