LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento SX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Control System - 2.4L) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2020 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the KDS on the Data Link Connector (DLC).
  2. Measure the output voltage and fuel pressure of the RPS at idle and various engine speed.
    Pressure Output Voltage (V) [Vref=5V]
    bar [MPa (kgf/cm2 , psi)]
    0 0 (0, 0) 0.5
    140 14 (142, 2031) 2.5
    280 28 (286, 4061) 4.5
    G12848577Courtesy of KIA MOTORS AMERICA, INC.