LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Cadenza Technology >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Wheel Alignment >> Wheel >> Repair Procedures >> Hub Nut Tightening Sequence >> Run Out Inspection

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel runout by using a dial indicator as displayed below.
    Runout Aluminum
    Radial mm (in.) Below 0.3 (0.0118)
    Lateral mm (in.) Below 0.3 (0.0118)
  3. If measured value exceeds the standard value, replace the wheel.
Fig 1: Measure Wheel Run-Out Using Dial Indicator
G12294137Courtesy of KIA MOTORS AMERICA, INC.