LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 2.0L) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 1]

[Bank 1/Sensor 1]

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the connector (A) and lift the vehicle.
    Fig 1: Locating Heated Oxygen Sensor Connector
    G12239134Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the sensor (A).
Fig 2: Locating Heated Oxygen Sensor
G12239135Courtesy of KIA MOTORS AMERICA, INC.