LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Electric Stability Program Diagnosis >> DTC C1260-02: Steering Angle Sensor Circuit-Signal >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

CAUTION: In case of replacing SAS, perform following procedures;

■ Steering Angle Sensor Calibration 

  1. Ignition "OFF"
  2. Connect KDS/GDS to Data Link Connector (DLC).
  3. Ignition "ON"
  4. Select "Vehicle S/W management" on KDS/GDS.
  5. Perform "Steering Angle Sensor Calibration" in "Vehicle S/W management" with KDS/GDS.
    Fig 1: Scantool Display - Vehicle S/W Management
    G12160260Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Scantool Display - Steering Angle Sensor Calibration 1
    G12160261Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Scantool Display - Steering Angle Sensor Calibration 2
    G12160262Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Scantool Display - Message Complete
    G12160263Courtesy of KIA MOTORS AMERICA, INC.