LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (6 Of 6) >> DTC U1111-00: Lin Message Timeout With EBS >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect Battery sensor connector.
  3. Ignition "ON"
  4. Measure voltage between Pin No. 1 (LIN Line) terminal of Battery Sensor connector and chassis ground.

    Specification:  Refer to Fig 1 below

    Fig 1: Scantool Display - Normal LIN Signal Waveform
    G12284116Courtesy of KIA MOTORS AMERICA, INC.
  5. Is measured value within specification?

    YES 

    NO