LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (6 Of 6) >> DTC P2227-00: Barometric Pressure Circuit Range/Performance >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Performance monitoring
  1. Air cleaner clogging
  2. Barometric Pressure Sensor (BPS)
Case 1 Enable Condition
  • Above 2.6s after engine "OFF"
  • Engine "OFF" (below 32RPM)
  • Barometric pressure higher than 400hPa and lower than 1150hPa
  • MAP voltage higher than 0.2V and lower than 4.8V
  • Throttle sensor voltage higher than 0.2V and lower than 4.8V
Threshold Value
  • Barometric pressure is out of range when engine is stop
  • Barometric pressure is 15kPa higher than intake air pressure
  • Barometric pressure is 15kPa higher than throttle pressure (PUT)
  • Intake air pressure (PUT) is 15kPa higher than throttle pressure (PUT)
Case 2 Enable Condition
  • Engine running (above 32RPM)
Threshold Value
  • Barometric pressure is out of range when engine is running
  • Barometric pressure is 15kPa higher than clogged throttle pressure (PUT)
  • Throttle pressure (PUT) of full load is is 20kPa higher than clogged throttle pressure (PUT)
  • Throttle pressure (PUT) of full load is -35 to 10kPa higher than barometric pressure
Detecting Time
  • 2s
MIL ON Condition
  • 2 driving cycles