LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 6) >> DTC P0230-00: Fuel Pump Primary Circuit >> Wiring Inspection >> Control Circuit Inspection

Control Circuit Inspection

  1. Ignition "OFF" & Disconnect PCB block and ECM connector.
  2. Ignition "ON".
  3. Measure voltage between Pin No. 8 (Fuel pump relay) terminal of PCB block harness connector and Pin No. 33 (Fuel pump relay control) terminal of ECM harness connector.

    Specification:  Approx. 1Ω below

  4. Is the measured voltage within specification?

    YES 

    NO