LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento SX, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.3L >> Fuel Line >> Repair Procedures >> Removal

Repair Procedures: Removal

High Pressure Fuel Pipe (High Pressure Fuel Pipe ↔ Delivery Pipe) 

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the camshaft position sensor [bank1/intake]

    (Refer to CAMSHAFT POSITION SENSOR REMOVAL

  4. Remove the intake manifold.

    (Refer to Engine Mechanical System INTAKE MANIFOLD REMOVAL

  5. Remove the high pressure fuel pipe function block mounting bolt (A), and then remove the high pressure fuel pipe.

    High Pressure Fuel Pipe Function Block Mounting Bolt: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m 7.2 ~ 8.7 lb-ft)

    Fig 1: Locate High Pressure Fuel Pipe Function Block Mounting Bolt
    G11872303Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the installation high pressure fuel pipe flange nut (A, B) from the high pressure fuel pipe with the special service tool [SST No.: 09314-3V100].

    High Pressure Fuel Pipe Flange Nut: 

    29.4 ~ 35.3 N.m (3.0 ~ 3.6 kgf.m, 21.7 ~ 26.0 lb-ft)

    Fig 2: Locate High Pressure Fuel Pipe Flange Nut
    G11872304Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the high pressure fuel pipe.
    Fig 3: High Pressure Fuel Pipe
    G11872305Courtesy of KIA MOTORS AMERICA, INC.

Low Pressure Fuel Line (Extension Fuel Line ↔ Extension Fuel Line Side Engine Room) 

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the air cleaner.

    (Refer to Engine Mechanical System AIR CLEANER REMOVAL

  4. Remove the low pressure fuel line mounting nuts (A).

    Low Pressure Fuel Line Mounting Nut: 

    3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Fig 4: Locate Low Pressure Fuel Line Mounting Nuts
    G11872306Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the fuel line fixing clip (A).
    Fig 5: Locate Fuel Line Fixing Clip
    G11872307Courtesy of KIA MOTORS AMERICA, INC.
  6. Lift the vehicle.
  7. Remove the front sub frame.

    (Refer to Suspension System FRONT SUB FRAME REMOVAL

  8. Remove the fuel line from the vehicle.

Low Pressure Fuel Line (High Fuel Pump ↔ Extension Fuel Line Side Engine Room) 

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  3. Remove the low pressure fuel line mounting nuts (A).

    Low Pressure Fuel Line Mounting Nut: 

    3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Fig 6: Locate Low Pressure Fuel Line Mounting Nuts
    G11872308Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connectors, and then remove the mounting bolts and remove the engine control wiring harness (A).
    Fig 7: Locate Engine Control Wiring Harness
    G11872309Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  6. Remove the low pressure fuel line mounting nuts (A).

    Low Pressure Fuel Line Mounting Nut: 

    3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Fig 8: Locate Low Pressure Fuel Line Mounting Nuts
    G11872310Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the low pressure fuel line mounting bolts, and then remove the low pressure fuel line (A).
    Fig 9: Locate Low Pressure Fuel Line Mounting Bolts
    G11872311Courtesy of KIA MOTORS AMERICA, INC.
    Fig 10: Locate Low Pressure Fuel Line
    G11872312Courtesy of KIA MOTORS AMERICA, INC.