LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima LX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Locks - Optima (Except HEV) >> Power Door Lock Module >> Repair Procedures >> Inspection >> Trunk Lock Module Inspection

Trunk Lock Module Inspection

  1. Remove the trunk lid trim.

    (Refer to Body - "TRUNK LID TRIM ")

  2. Disconnect the connector from the actuator
    Fig 1: Locating Trunk Lock Module Connector Terminals
    G11828190Courtesy of KIA MOTORS AMERICA, INC.
  3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.
    Fig 2: Checking Actuator Operation
    G11828191Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Trunk Lock Module Terminal Operation Chart
    G11828192Courtesy of KIA MOTORS AMERICA, INC.