LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Electric Stability Program Diagnosis >> DTC C1623: CAN Time-Out Steering Angle Sensor >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

■ Open Check 

  1. IG "OFF".
  2. Disconnect HECU and EPS connector.
  3. Measure resistance between CAN High/Low terminal of the HECU harness connector and CAN High/Low terminal of the EPS harness connector.

    Specification:  Approx. below 1Ω

  4. Is the measured value within specifications?

    YES 

    NO 

    • Repair open in CAN BUS line between HECU harness connector and EPS ECU harness connector and then go to "Verification Of Vehicle Repair " procedure.