LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2014 >> Soul ! >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 1.6L) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

    [Bank 1/Sensor 1] 

    Fig 1: Identifying Heated Oxygen Sensor Connectors (Bank 1/Sensor 1)
    G09772992Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying Heated Oxygen Sensor (Bank 1/Sensor 1)
    G09772993Courtesy of KIA MOTORS AMERICA, INC.

    [Bank 1/Sensor 2] 

    Fig 3: Identifying Heated Oxygen Sensor Connectors (Bank 1/Sensor 2)
    G09772994Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Identifying Heated Oxygen Sensor (Bank 1/Sensor 2)
    G09772995Courtesy of KIA MOTORS AMERICA, INC.