LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.0L) >> Canister Close Valve (CCV) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector.
  4. Disconnect the ventilation hose (A) from the fuel tank air filter and canister close valve.
  5. Remove the installation bolts (B), and then remove the canister close valve.
    Fig 1: Canister Close Valve, Ventilation Hose And Bolts Component Location
    G08331099Courtesy of KIA MOTORS AMERICA, INC.