LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System Diagnosis >> DTC P1675: Immobilizer-Transponder Programming Error >> Scantool Diagnostics >> Monitor Scantool Data

Monitor Scantool Data

  1. Check status
    1. IGN "ON" & Engine "OFF"
    2. Monitor the "ECM, Key and Smartra Status" Parameter on the Scantool.

      Specification:  'LEARNT'

      Fig 1: Scantool Display - ECM, Key And Smartra Status
      G08331901Courtesy of KIA MOTORS AMERICA, INC.

      This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.

    3. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter within specifications?

      YES 

      Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, damage on the ECM or SMARTRA. And This DTC has not erased in previous repair. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      Go to "COMPONENT INSPECTION " Procedure.