LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Interior Trim >> Repair procedures >> Replacement >> Center Pillar Trim Replacement

Center Pillar Trim Replacement

CAUTION:
  • Put on gloves to protect your hands.
  • Use a plastic panel removal tool to remove interior trim pieces to without marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the following items:
    1. Front door scuff trim
    2. Rear door scuff trim
  2. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  3. The seat belt anchor pretensioner (A) can be removed after pushing the lock pin (B) as arrow direction.
    Fig 1: Pushing Seat Belt Anchor Pretensioner Lock Pin
    G08322595Courtesy of KIA MOTORS AMERICA, INC.
  4. Using a screwdriver or remover, remove the center pillar lower trim (A).
    Fig 2: Identifying Center Pillar Lower Trim
    G08322596Courtesy of KIA MOTORS AMERICA, INC.
  5. Using a screwdriver or remover, remove the center pillar upper trim (A).
    Fig 3: Identifying Center Pillar Upper Trim
    G08322597Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
    NOTE:
    • Replace any damage clips.