LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Crash Pad Upper Panel Replacement

Crash Pad Upper Panel Replacement

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to bend or scratch the trim and panels.
  • Put on gloves to protect your hands.
  1. Remove the following items:
    1. Center fascia panel
    2. Audio assembly
    3. Cluster fascia panel
    4. Cluster assembly
    5. Crash pad side cover [LH, RH]
    6. Crash pad lower panel
    7. Glove box & Glove box housing
    8. Heater control unit
  2. After loosening the mounting screws, then remove the crash pad upper panel (A).
    Fig 1: Identifying Crash Pad Upper Panel And Mounting Screws
    G08322567Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Make sure the connectors are connected in properly.
    • Replace any damage clips.