LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Crash Pad Center Panel Replacement

Crash Pad Center Panel Replacement

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to bend or scratch the trim and panels.
  • Put on gloves to protect your hands.
  1. Remove the following items:
    1. Floor console assembly

      (Refer to the "CONSOLE ")

    2. Crash pad side cover [LH, RH]
    3. Crash pad lower panel
    4. Glove box & Glove box housing
    5. Heater control unit
  2. Using a screwdriver or remover, remove the crash pad center panel (A).
    Fig 1: Identifying Crash Pad Center Panel
    G08322562Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the connectors (A).
    Fig 2: Identifying Crash Pad Center Panel Connectors
    G08322563Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connectors are connected in properly.
    • Replace any damage clips.