LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2012 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Center Fascia Panel Replacement

Center Fascia Panel Replacement

CAUTION:
  • A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to bend or scratch the trim and panels.
  • Put on gloves to protect your hands.
  1. Using a screwdriver or remover, remove the center fascia panel (A).
    Fig 1: Identifying Center Fascia Panel
    G08322546Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the start/stop button connector (A) and hazard switch connector (B).
    Fig 2: Identifying Start/Stop Button Connector And Hazard Switch Connector
    G08322547Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are connected in properly.
    • Replace any damage clips.