LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Forte EX, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Oil Pump >> Repair procedures >> Removal

Repair procedures: Removal

[2.0 Non-BSM] 

  1. Remove the timing chain. (Refer to TIMING SYSTEM )
  2. Remove the oil pump mechanical tensioner (B).
  3. Remove the oil pump chain guide (D).
    Fig 1: Identifying Oil Pump Mechanical Tensioner & Oil Pump Chain Guide (2.0 Non-BSM)
    G06495112Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the oil pump (A) and oil pump chain.
    Fig 2: Identifying Oil Pump (2.0 Non-BSM)
    G06495113Courtesy of KIA MOTORS AMERICA, INC.

[2.4 BSM] 

  1. Remove the timing chain.

    (Refer to TIMING SYSTEM )

    NOTE:
  2. Install a set pin after compressing the balance shaft chain tensioner.
  3. Remove the balance shaft chain hydraulic tensioner (A).
  4. Remove the balance shaft chain tensioner arm (B).
  5. Remove the balance shaft chain guide (C).
    Fig 3: Identifying Balance Shaft Chain Hydraulic Tensioner, Arm, & Chain Guide (2.4 BSM)
    G06495114Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the oil pump & balance shaft module (A) and balance shaft chain (B).
    Fig 4: Identifying Oil Pump/Balance Shaft Module & Balance Shaft Chain (2.4 BSM)
    G06495115Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Do not disassemble the oil pump & balance shaft module.