LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.4L >> DTC P2251: O2 Sensor Reference Ground Circuit/Open (Bank 1 Sensor 1) >> Inspection Repair >> Component Inspection

Component Inspection

  1. Inspect the front HO2S for any silicon contamination. This contamination will be indicated by a white powdery coating and this will result in a bad false voltage signal.
  2. Is sensor contaminated?

    YES 

    • Substitute with a known-good HO2S and check for proper operation. If the problem is corrected, replace HO2S and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks, or poor terminal-to-wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.