LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> General Information (Engine Electrical System) - 2.4L >> General Information >> The Micro 570 Analyzer >> Charging System Test Procedure >> Notes

Charging System Test Procedure: Notes

  1. Press ENTER to begin charging system test.
    Fig 1: Display - Press Enter For Charging Test
    G06386044Courtesy of KIA MOTORS AMERICA, INC.
  2. ENTER button is pressed, the tester displays the actual voltage of alternator.

    Press ENTER to test the charging system.

    Fig 2: Display - Actual Voltage Of Alternator
    G06386045Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn off all electrical load and rev engine for 5 seconds by pressing the accelerator pedal.
    Fig 3: Display - Loads Off / Rev Engine 5 Sec Message
    G06386046Courtesy of KIA MOTORS AMERICA, INC.
  4. Press ENTER.
    Fig 4: Display - Loads Off / Rev Engine 5 Sec Message
    G06386046Courtesy of KIA MOTORS AMERICA, INC.
  5. The MICRO 570 analyzer charging system output at idle for comparison to other readings.
    Fig 5: Display - Testing Massage
    G06386048Courtesy of KIA MOTORS AMERICA, INC.
  6. Take a relevant action according to the test results by referring to the table below after shutting off the engine and disconnect the tester clamps from the battery.
    Fig 6: Display - Test Result
    G06386049Courtesy of KIA MOTORS AMERICA, INC.