LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 2.4L >> Fuel Tank >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Preparation
    1. Remove the 3rd seat (Refer to REAR SEAT ).
    2. Open the service cover (A).
      Fig 1: Identifying Service Cover
      G06386182Courtesy of KIA MOTORS AMERICA, INC.
    3. Disconnect the fuel pump connector (A).
      Fig 2: Identifying Fuel Pump Connector
      G06386183Courtesy of KIA MOTORS AMERICA, INC.
    4. Start the engine and wait until fuel in fuel line is exhausted.
    5. After engine stalls, turn the ignition switch to OFF position.
  2. Disconnect the fuel feed tube quick-connector (A), the fuel tank pressure sensor connector (B), and the canister close valve connector (C).
    Fig 3: Identifying Fuel Feed Tube Quick-Connector, Fuel Tank Pressure Sensor Connector, & Canister Close Valve Connector
    G06386184Courtesy of KIA MOTORS AMERICA, INC.
  3. Lift the vehicle and remove the muffler assembly (Refer to MUFFLER ).
  4. Support the fuel tank with a jack.
  5. Disconnect the fuel filler hose (A) and vent hose (B).
    Fig 4: Identifying Fuel Filler Hose & Vent Hose
    G06386185Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the vacuum hoses (A) from the canister (B).
    Fig 5: Identifying Vacuum Hoses & Canister
    G06386186Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the upper arm (A), the lower arm (B), the assist arm (C), and the stabilizer bar (D) from the fuel tank & suspension member assembly.
    Fig 6: Identifying Upper Arm, Lower Arm, Assist Arm, & Stabilizer Bar (1 Of 2)
    G06386187Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the mounting bolts (E) and nuts (F), and then remove the fuel tank & suspension member assembly from the vehicle.
    Fig 7: Identifying Mounting Bolts & Nuts
    G06386188Courtesy of KIA MOTORS AMERICA, INC.