LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0124 Throttle/Pedal Position Sensor/Switch "A" Circuit Intermittent >> TPS Circuit Inspection

TPS Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect TPS connector.
  3. Ignition "ON"
  4. Measure voltage between terminal "1", "2" and "3" of sensor harness connector and chassis ground

    Specification:

    Terminal 1: Approx. 5V

    Terminal 2: Approx. 5V

    Terminal 3: Approx. 0V

  5. Is the measured voltage within specifications?

    YES 

    NO