LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rio Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) >> DTC P0107 Manifold Absolute Pressure/Barometric Pressure Circuit Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. IG "OFF".
  2. Disconnect MAPS connector.
  3. IG "ON" & ENG "OFF"
  4. Measure voltage terminal 1 of MAPS harness connector and chassis ground.

    Specification : Approx. 5V

    Fig 1: Measuring Voltage Terminal 1 Of MAPS Harness Connector And Chassis Ground
    G06130122Courtesy of KIA MOTORS AMERICA, INC.
  5. Is the measured resistance within specification?

    YES 

    NO