LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0765 Shift Control Solenoid Valve D Circuit Malfunction >> DTC Detecting Condition

DTC P0765 Shift Control Solenoid Valve D Circuit Malfunction: DTC Detecting Condition

DTC DETECTING CONDITION

Item Detecting Condition Possible cause
DTC Strategy 
  • Check voltage range
  • Open or short in circuit
  • Faulty OD SOLENOID VALVE
  • Faulty PCM/TCM
Enable Conditions Case 1 
  • 16V > Voltage Battery > 10V
Case 2 
  • Voltage Battery > 10V
  • OIL TEMP. ≥ -23.5°C (-10.3°F)
  • 2nd gear and not under the down shifting
  • Engine speed ≥ 450 RPM
  • Output speed > 100 RPM
  • Input speed > 0 RPM
  • Inhibitor switch is normal and after 2sec is passed from IG ON
Threshold value  Case 1 
  • Feedback voltage from 2nd control solenoid > Vb-2V and 2nd control duty is 0%
  • Feedback voltage from 2nd control solenoid ≤ 5.5V and 2nd control duty is 100%
Case 2 
  • | Input speed/3rd gear ratio - output speed | ≤ 50 RPM
Diagnostic Time 
  • More than 320 ms
Fail Safe 
  • Locked in 3 rd gear. (Control relay off)