LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0734 Gear 4 Incorrect Ratio >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Connect Scantool.
  2. Engine "ON".
  3. Monitor the "INPUT & OUTPUT SPEED SENSOR" parameter on the scantool.
  4. Accelerate the Engine speed until about 2000 RPM in the 4th gear.

    Specification : INPUT SPEED - (OUTPUT SPEED x GEAR RATIO) ≤ 200 RPM

    Fig 1: Scantool Display - Shift Position
    G05186385Courtesy of KIA MOTORS AMERICA, INC.
  5. Is "INPUT & OUTPUT SPEED SENSOR" within specifications?

    YES 

    NO 

    • Check for electrical noise of circuit in INPUT & OUTPUT SPEED SENSOR or replace INPUT & OUTPUT SPEED SENSOR. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.