LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0731 Gear 1 Incorrect Ratio >> Component Inspection

Component Inspection

Fig 1: Identifying UD And L/R Port
G05186372Courtesy of KIA MOTORS AMERICA, INC.
  1. Connect oil pressure gauge to "UD" and "L/R" port.
  2. Engine "ON".
  3. Drive the car with gear position 1 in "SPORTS MODE".
  4. Compare it with reference data as below.

    Specification : shown below

    MEASUREMENT CONDITION

    Measurement condition Standard hydraulic pressure kPa (psi)
    Selector lever position Shift position Engine speed ( RPM) Under drive clutch pressure Reverse clutch pressure Overdrive clutch pressure Low & reverse brake pressure Second brake pressure Damper clutch Apply pressure (DA) Damper clutch Release pressure (DR)
    P - 2,500 - - - 260-340 (38-50) - - -
    R Reverse 2,500 - 1,270-1,770 (185-256) - 1,270-1,770 (185-256) - - -
    N - 2,500 - - - 260-340 (38-50) - - -
    D 1st gear 2,500 430-510 (62-74) - - 1,010-1,050 (146-152) - - -
    2nd gear 2,500 430-510 (62-74) - - - 430-510 (62-74) - -
    3rd gear 2,500 430-510 (62-74) - 430-510 (62-74) - - More than 730 (100) 0-10 (0-1)
    4th gear 2,500 - - 430-510 (62-74) - 780-880 (110-130) More than 730 (100) 0-10 (0-1)

    * The values are subject to change according to vehicle model or condition

  5. Is oil pressure value within specification?

    YES 

    NO